How to Scrape Google Maps Business Listings (No Code): A Step-by-Step Guide

Extract business names, ratings, addresses, and websites from Google Maps into Excel, CSV or JSON with CrawlPilot: load the list, point at one card, export, and what breaks.

Rahul Bisht

Founder, CrawlPilot

·
Jul 4, 2026
·Tutorials·
9 min read
·
How to Scrape Google Maps Business Listings (No Code): A Step-by-Step Guide
Key takeaway
Scroll the Maps results panel to the end, then point at one business card: CrawlPilot turns the whole loaded list into a table of names, ratings, addresses and websites you can export. Skip the scroll and you get only the first handful.

You can scrape a Google Maps search — "coffee shops in Austin", "dentists near me", "plumbers in Manchester" — into a clean CSV or JSON file of business names, ratings, review counts, addresses, and websites without writing a line of code. You do it in the results panel on the left of Maps using CrawlPilot's List Extractor, and the whole job takes a few minutes per search.

The catch is that Google Maps loads results into a scrolling panel, not fixed pages, so the list has to be loaded before CrawlPilot reads it. This guide covers loading the list, pointing at one card, the preview, the table and its exports, and what breaks.

A note on ethics and terms: This guide is for extracting publicly listed business information for legitimate uses like local market research and lead generation. Google's Terms of Service restrict automated access. Keep volumes low, don't hammer the service, and don't collect personal data. See our privacy and ethics guide.


What You'll Need

  • CrawlPilot installed and pinned (see the quickstart if you haven't set it up)
  • A normal Chrome session logged into your regular profile
  • A specific search in mind — the tighter the query, the cleaner the data

Before You Start: Session Preparation

Google Maps is aggressive about flagging automated behavior. Reduce your footprint first:

  1. 01
    Use your regular Chrome profile, not Incognito. A session with normal Google cookies looks far less suspicious.
  2. 02
    Run the search manually first and glance through the results — that's what a real user does.
  3. 03
    Don't use a VPN whose location contradicts your search region.
  4. 04
    Keep the search specific. "Plumbers in Round Rock TX" gives a clean, manageable list; "Plumbers in Texas" gives noise and heavier rate limiting.

Step 1: Run Your Search and Load the Results

Go to google.com/maps, type your query, and press Enter. The results panel appears on the left — a scrolling list of business cards, each with a name, rating, category, and address.

Google only renders a handful of results at first. Scroll the results panel down slowly until you see "You've reached the end of the list." at the bottom. Everything you want must be scrolled into view — CrawlPilot extracts what's rendered in the DOM, and Maps lazy-loads cards as you scroll. For most searches you'll load 60–120 businesses this way.


Step 2: Open CrawlPilot on the Results

Click the CrawlPilot icon. The side panel opens on the right. If the home screen doesn't offer Get them as a table for the results, click A list under Or choose what you want. The first time, the panel may ask you to Allow access to the page. That's a one-time step (why).


Step 3: Point at One Business Card

This is the part people expect to be hard and isn't. You don't map out columns or hunt for containers. You point at one business card and CrawlPilot works out the rest.

  1. 01
    Click Point at one item.
  2. 02
    Hover over one business card in the results panel. The whole results list highlights, labelled with the number of cards it found. If it highlights the map or the whole page instead, press ↓ for a narrower section.
  3. 03
    Click the card (the middle of it, not a button inside it).

The panel shows N items found, where N should roughly match the cards you scrolled into view, plus a preview of the first rows. See the full preview opens every row and column, so you can check the data before running. Under the picked list you can rename or remove details, or Edit a selector.

Google Maps uses obfuscated class names, so some columns get generic names. Rename them in the table afterwards.


Step 4: Keep It to the Loaded List

Google Maps has no Next button. Because you scrolled the full list into view in Step 1, every card is already on the page. The panel should say Only this page. If it suggests following something else, click Change and choose Scrolling, or all on one page.

For very large searches, work in batches: scroll a chunk, get the data, then scroll further and run again. Each run is saved in My data, ready to export and combine.


Step 5: Get the Data and Export

Click Get all N items. Keep the side panel open while it runs; Stop keeps every row read so far. When it says Done, click See your table.

You get one row per business. The columns depend on what each card shows: typically the name, rating, review count, the category and address line, and the link to the business's Maps page. A website appears only for businesses that list one on their card.

Click Export (top right) and choose a format:

FormatUse it for
Excel (.xlsx) or CSVSheets / Excel
JSONFeeding into scripts or other tools
Google Sheets, Webhook, Airtable, ZapierSending rows straight on (set up)

Cleaning the Output

The review count and the combined category/address line usually need a quick pass. In Google Sheets or Python (adjust the column names to yours):

python
import re # "(2,131)" -> 2131 reviews = int(re.sub(r'[^0-9]', '', row['reviews'])) # "Coffee shop · 3101 S 1st St" -> category + address parts = row['category_address'].split('·') category = parts[0].strip() address = parts[1].strip() if len(parts) > 1 else ''

What Breaks and Why

The good path and where it most often goes wrong:

122skip scrolling3too many searches4Maps searchone area, one categoryScroll to the endYou've reached the endOnly 10–15 rowslist not loadedCAPTCHA orreshufflesearches too fastPoint at one cardLead listCSV, Excel, JSON
  1. Maps loads results into a scrolling panel. Scroll it until it says you've reached the end of the list, then wait a moment.
  2. Point at one business card; CrawlPilot reads every loaded card into one table.
  3. Point too early and you only get the cards loaded so far, usually 10 to 15.
  4. Run searches too fast and Google throttles you. Stop, solve any CAPTCHA by hand, and space out your searches.

4 steps. Press Play to walk through them, or click any part of the diagram.

A Maps search, from results panel to lead list

Only 10–15 results extracted instead of 100+

You didn't scroll the full list into view before extracting. Scroll the results panel to "You've reached the end of the list.", wait 2 seconds, then point at a card again.

The pattern catches the wrong things

Hover again and use ↑ / ↓ until the highlight covers just the results list, or click Point at one item again on a cleaner card. See the full preview is the fastest way to catch this before a full run.

Address and category are merged into one field

That's how Maps renders them — one text node with a · separator. Split them in post-processing rather than fighting selectors.

Website column is blank for many rows

Not every business links a website on its Maps card. Blanks are correct.

Results reshuffle or a CAPTCHA appears

Google throttled you. Stop, solve any CAPTCHA manually, wait 15–20 minutes, and space out your searches.


Frequently Asked Questions

Can I export Google Maps data as JSON, not just CSV?

Yes. On the results table, the Export menu offers Excel, CSV and JSON locally, plus Google Sheets, Webhook, Airtable, and Zapier. Pick JSON if you're piping the data into a script or another app.

Extracting publicly displayed business info (names, addresses, ratings) for research or lead generation is treated differently from collecting personal data, but Google's Terms of Service do restrict automated access (see Is web scraping legal in 2026?). Stay within reasonable volumes and consider the official Places API for commercial scale.

Can I get email addresses from Google Maps?

No — Maps doesn't display emails. But CrawlPilot's Contacts from websites can take this dataset's website column and read each business's own site for the emails, phones and social profiles it publishes.

As many as you scroll into view — typically 60–120 before Maps stops loading more. For larger regions, break the search into neighborhoods or zip codes and merge the results.


What to Try Next

Once you have a table of businesses with their websites, run Contacts from websites on its website column, or Same details from many pages to pull services or hours from each site. Two passes, one for the map results and one to enrich each business, turn a single search into a rich local dataset. The same scroll-then-point steps work on Zillow property listings.

Ready to start? Install CrawlPilot and try it on one local search first.